Hi,
I've connected a HP P2000 to our HP DL380 G8. 2 Network interfaces from the DL380 to the P2000's on different controllers.
I used this page for instructions:
http://blog.vmpros.nl/2011/07/13/vmware-creating-iscsi-network-in-vsphere-esxi-5-0/
The same subnet is used on the 2 network adapters. I'm wondering if that is as it should be.
I'm more a network guy and i know that an OS usually uses only 1 of the adapters.
So I was wondering if anyone has experience with this type of setup.
The picture below shows only one of the path's is used. Which I would exepct, but not sure how to fix this.
I'm using ESX 5.1.
Regards
Dennis