Thanks for the answers, but that's don't work.
~ # esxcli software vib install -d /vmfs/volumes/VM4-Local-R1/tg3-3.129d.v50.1-offline_bundle-1013484.zip
Installation Result
Message: Host is not changed.
Reboot Required: false
VIBs Installed:
VIBs Removed:
VIBs Skipped: Broadcom_bootbank_net-tg3_3.129d.v50.1-1OEM.500.0.0.472560
~ # esxcli network nic list
Name PCI Device Driver Link Speed Duplex MAC Address MTU Description
------ ------------- ------ ---- ----- ------ ----------------- ---- -------------------------------------------------------
vmnic0 0000:001:00.0 tg3 Up 1000 Full 90:b1:1c:54:07:5e 1500 Broadcom Corporation NetXtreme BCM5720 Gigabit Ethernet
vmnic1 0000:001:00.1 tg3 Up 1000 Full 90:b1:1c:54:07:5f 1500 Broadcom Corporation NetXtreme BCM5720 Gigabit Ethernet
vmnic2 0000:002:00.0 tg3 Up 1000 Full 90:b1:1c:54:07:60 1500 Broadcom Corporation NetXtreme BCM5720 Gigabit Ethernet
vmnic3 0000:002:00.1 tg3 Up 1000 Full 90:b1:1c:54:07:61 1500 Broadcom Corporation NetXtreme BCM5720 Gigabit Ethernet
vmnic4 0000:004:00.0 tg3 Up 1000 Full 00:0a:f7:11:d6:e4 1500 Broadcom Corporation NetXtreme BCM5719 Gigabit Ethernet
vmnic5 0000:004:00.1 tg3 Up 1000 Full 00:0a:f7:11:d6:e5 1500 Broadcom Corporation NetXtreme BCM5719 Gigabit Ethernet
vmnic6 0000:004:00.2 tg3 Up 1000 Full 00:0a:f7:11:d6:e6 1500 Broadcom Corporation NetXtreme BCM5719 Gigabit Ethernet
vmnic7 0000:004:00.3 tg3 Up 1000 Full 00:0a:f7:11:d6:e7 1500 Broadcom Corporation NetXtreme BCM5719 Gigabit Ethernet
~ # ethtool -i vmnic4
driver: tg3
version: 3.129d.v50.1
firmware-version: FFV7.4.8 bc 5719-v1.31
bus-info: 0000:04:00.0
~ # ethtool -i vmnic0
driver: tg3
version: 3.129d.v50.1
firmware-version: FFV7.4.8 bc 5720-v1.30
bus-info: 0000:01:00.0